安科瑞 師晴晴
江蘇安科瑞電器制造有限公司 江蘇江陰
1.項目背景Background
隨著光伏行業的發展,部分地區村級變壓器及工業用電變壓器容量與光伏項目的裝機容量處于飽和。電網公司要求對后建的光伏并網系統為不可逆流發電系統,指光伏并網系統所發生的電由本地負載消耗,多余的電不允許通過低壓配電變壓器向上級電網逆向送電。
With the development of photovoltaic industry, the capacity of village-level transformers and industrial power transformers and the installed capacity of photovoltaic projects are saturated in some areas.The power grid company requires the photovoltaic grid-connected system to be a non-backflow current generation system, which means that the electricity generated by the photovoltaic grid-connected system is consumed by the local load, and the excess electricity is not allowed to be sent to the upper power grid through the low-voltage distribution transformer in reverse direction.
光伏逆變器在將光伏組件產生的直流電變換成交流電時,會夾雜有直流分量和諧波,三相電流不平衡,輸出功率不確定性等,目前基本沒有采取有效的治理手段,因此,當有發電功率送往公用電網時,就會對電網產生諧波污染,易造成電網電壓波動,閃變等,如果有許多這樣的發電源向電網輸電時,會導致電網電能質量嚴重下降。所以這類光伏發電系統必須配套加裝防逆流設施,來防止逆功率的發生。
Photovoltaic inverter in photovoltaic components will produce direct current into alternating current (ac), has the dc component and harmonic mixing, unbalanced three phase current, output power of uncertainty, such as the current basic didn't take effective management measures, therefore, when there is power to the utility grid, will generate harmonic pollution to power network, easy cause power grid voltage fluctuation and flicker, etc.,If there are many such power sources to transmit electricity to the grid, the power quality of the grid will be seriously degraded.Therefore, this kind of photovoltaic power generation system must be equipped with anti-backflow current facilities to prevent the occurrence of reverse power.
當光伏發電量大于負載需求電量時,會產生逆功率。因此,我們需要儀表來判定。逆變器有過功率輸出,再由儀表通過RS485通訊發出信號和逆變器數據交互,調節逆變器輸出功率,使其輸出功率和用電功率平衡。
When the photovoltaic power generation is greater than the load demand, the inverse power will be generated.So we need instruments to determine that Inverter has power output, and then by the instrument through RS485 communication signal and inverter data interaction, adjust the inverter output power, so that its output power and power balance.
2.項目概述Project Overview
菲律賓一家做光伏發電的公司,聯系到我司,尋找防逆流電表 , 對接協議合適后, 采購我司的ACR10R-D16TE.
A photovoltaic power generation company in the Philippines contacted our company to look for anti-backflow current meters. After proper connection agreement, we will purchase ACR10R-D16TE from our company.
3.防逆流檢測儀表Anti-backflow detection meter
當光伏發電量大于負載需求電量時,會產生逆功率。因此,我們需要儀表來判定逆變器有過功率輸出,再由儀表通過RS485通訊發出信號和逆變器數據交互,調節逆變器輸出功率,使其輸出功率和用電功率平衡。
When the photovoltaic power generation is greater than the load demand, reverse power will be generated. Therefore, we need an meter to determine that the inverter has over-power output, and then the meter sends a signal through RS485 communication to interact with the inverter data to adjust the output power of the inverter to balance the output power and the electrical power.
4.功能Function
5.接線Wiring
6.典型鏈接 Typical Connection
參考文獻 Bibliography
1.Solutions for enterprise micro-grid system